ZHANGJIAGANG U TECH MACHINE was founded at 2008.
It is located at Zhangjiagang city economic industrial town,
We devote ourselves to the development, research and production of extrusion blow molding machine
stay connected :
Extrusion blow molding machine for making plastic bottles, drums, auto parts and hollow parts of all kinds. The machines process a variety of materials, including HDPE, LDPE, PP, PVC, TPU, PETG and other materials. It is used in the packaging of petroleum, cosmetics, chemicals, pharmaceuticals,food, toys and auto-parts.
Introduction
Extrusion blow molding machine for making plastic bottles, drums, auto parts and hollow parts of all kinds. The machines process a variety of materials, including HDPE, LDPE, PP, PVC, TPU, PETG and other materials. It is used in the packaging of petroleum, cosmetics, chemicals, pharmaceuticals,food, toys and auto-parts.
Machine Features
1. Control Unit: Japan Mitsubishi PLC programmable controller and Taiwan HITECH touch panel. English parameter process setting, state monitoring and products counting are convenient and intuitionistic. PLC automatic temperature control model.
2. Hydraulic Unit: It adopts international famous Japan YUKEN brand hydraulic valve and seal, proportional control. And has features of high stationarity and reliability, accurate operation, long longevity, quick response and so on.
3. Extrusion Unit: Hard gear surface decelerator; famous HFinverter inverter adopts Italian technology; Screw speed regulation adopts variable-frequency speed regulation control system. It has the features of stable rotate speed, powerful power, energy-saving and so on. Mixing screw has wide applicability to raw materials and the plasticization quality is even better. Energy-saving machine barrel and A-alloy heaters are adopted for heating
4. Die Head Unit: With single cylinder material-center-in accumulator head, is smooth and dependable. This die head adopts German technology and is made by special imported steel.
5. Clamping Unit: Adopts fixed mould open-closing system,fast and balanced.
6. Blow Fitting Unit: Down blowing fitting is equipped.
7. Lifter Unit: Four turbine reducer liter, lifting balance, quick, stable.
8. Electrical Components: All of the electrical components are made in Japan and Taiwan.
Technical parameter
| Parameters | Units | BST65S-5L |
| Screw Diameter | mm | 65 |
| Screw RPM(50HZ) | r/min | 10-70 |
| Extrusion capacity per hour(PE) | Kg/h | 60 |
| Opening stoke | mm | 420 |
| Platen Size | mm | 320*410 |
| Clamping stoke | mm | 150-500 |
| Clamping Force | KN | 68 |
| Dry cycle time | S | 5 |
| Cooling water pressure | Mpa | 0.2-0.3 |
| Cooling water consumption | L/min | 50 |
| Air pressure | Mpa | 0.8 |
| Compressed air consumption | m³/min | 0.4 |
| Machine Dimension(L*W*H) | mm | 3390*1750*2400 |
| Machine net weight | T | 5 |
| Double Head Central Distance | mm | 160 |
| Triple Head Central Distance | mm | 110 |
| Four Head Central Distance | mm | 85 |
| Extrusion motor | KW | 18.5 |
| Extruder heating power | KW | 13.8 |
| Power of die heating zone | KW | 3 |
| Hydraulic motor | KW | 7.5 |
| Total Power | KW | 45.5 |
ZHANGJIAGANG U TECH MACHINE was founded at 2008.
It is located at Zhangjiagang city economic industrial town,
We devote ourselves to the development, research and production of extrusion blow molding machine
NO. 11,Yuefeng Road, Zhangjiagang
+86 13962296786